Skip to content
Call Now
Frame Straightening & Structural Alignment at EZ Autobody, Salem, MA

Frame Straightening & Structural Alignment in Salem, MA

Frame straightening and structural alignment return a vehicle's frame or unibody to its factory dimensions after a hard hit, so it drives straight and protects you in the next crash. EZ Autobody does this work at our I-CAR Gold Class, aluminum certified shop on 63 Jefferson Ave in Salem.

Call (978) 338-5797

What Is Frame Straightening & Structural Alignment?

Frame straightening and structural alignment is the repair that brings a damaged frame or unibody back to its factory dimensions. Most cars have no separate frame, so the body itself is the structure. Trucks often still ride on a full frame, and both kinds can bend in a crash.

The work starts with measuring the vehicle against its factory specs to see where it moved and how far. Then we pull the structure back into place with frame equipment, or replace parts that cannot be saved. Last, we measure again to confirm every point is where it should be.

Why Frame Straightening Matters in Salem, MA

A vehicle's structure decides how it protects you in a crash. When it is out of shape, the crumple zones and airbag sensors may not work as they were designed to. That is a real safety risk on busy routes like Route 1A and Route 114 through Salem.

A bent structure also wears the car out. The tires wear unevenly, the doors leak, and the car pulls on wet or icy winter roads. Fixing it right restores both safety and value.

When to Consider Frame Straightening in Salem, MA

Have the structure checked after any moderate or hard collision, even if the car still drives. A slide into a curb or a snowbank on a winter road can bend suspension mounts too. If an airbag deployed, structural damage is likely.

Act quickly when the car pulls, the tires wear on one edge, or the doors no longer close well. Also check it before you buy a used vehicle with an accident history. A measurement tells you what is really there.

Signs You Need Frame Straightening & Structural Alignment

Watch for these signs after an impact:

My car won't drive straight

A shifted structure pulls the wheels out of line.

The tires wear on one edge

Uneven wear can mean the mounting points moved.

Doors and hood don't line up

Uneven gaps show the body has shifted.

It creaks or clunks over bumps

Stressed mounts and welds can make new noises.

The steering wheel is off center

A bent part can turn the wheel even when driving straight.

How Our Frame Straightening Works

Getting your vehicle's structure repaired at our Salem shop takes four steps:

  • Step 1: Call (978) 338-5797 or request an estimate online, and ask about towing assistance if the vehicle cannot be driven.
  • Step 2: Bring your vehicle in so we can inspect and measure the structure.
  • Step 3: We explain what moved and what the repair takes before any work starts.
  • Step 4: Once you approve, we straighten the structure and get you back on the road.

Unibody and Frame Pulling

Using frame equipment, we anchor the vehicle and pull the damaged area back toward its factory position. The pull is done in steps, measuring as we go, so the metal returns to shape without new stress. Parts that are kinked or torn are replaced rather than pulled.

On trucks with a full frame, the same idea applies to the frame rails. Our light and medium-duty truck repair service covers the mechanical work that often comes with frame damage. Our collision repair service handles the panels on top.

Measuring and Aluminum Structures

Measuring is what makes structural repair accurate. We compare the vehicle's key points to its factory dimensions before, during and after the repair. That way we know the structure is right, not just that the panels look right.

Many newer trucks and cars use aluminum in the structure, and electric vehicles often do too. As an aluminum certified shop, we use the right tools and methods for it. Our EV collision repair service covers the extra steps electric vehicles need.

Suspension and Wheel Alignment After Frame Work

A hard hit often bends suspension parts along with the structure. Control arms, tie rods, struts and mounting points can all move out of place. We inspect each one and replace any part that is bent rather than trying to straighten it.

Once the structure and suspension are right, the wheels must be set to their correct angles. A proper alignment lets the vehicle drive straight and keeps the tires wearing evenly. Our full-service auto mechanical repair team handles the suspension work that goes with it.

Why Salem Customers Choose EZ Autobody

EZ Autobody has served Salem since 2009, and our team brings 40 years of experience to structural repair. We are an I-CAR Gold Class shop and aluminum certified, trained for the steel and aluminum structures of modern vehicles. Together we have repaired more than 14,000 vehicles.

All our work is backed by a lifetime warranty. Most repairs are done in 7 to 10 days, based on parts availability and the job's difficulty. We are a direct repair shop for Allstate, GEICO, Farmers, Amica and Safety, and we offer towing assistance.

DRIVEN BY TRUST, HEAR FROM SALEM DRIVERS

Trusted by Drivers in Salem, MA

  • Friendly, talented, accommodating professionals, who did an immaculate job with the repair left my car cleaner than it was when I brought it there and even found a necklace that I had lost and didn’t realize it was lost in my car. Amazing. I will definitely recommend them to anyone who needs auto bodywork.
    Linda SavareseGoogle review
  • Had an accident on the right front of my car. EZ Autobody repaired it. They did an excellent job. My car looks brand new. They even detailed the interior of the car. I will recommend EZ Autobody to anyone needing repair work.
    Claire TobeyGoogle review
  • Great job on body repair! They moved crap from the back of my car to the trunk and detailed the inside. The rental came to the shop and I deopped the car off there.
    Jacques DuranceauGoogle review
Read every review on Google
Frequently Asked Questions

Frequently Asked Questions about Frame Straightening & Structural Alignment

Get clear answers about our services in Salem, MA, and let our team help you choose the right repair for your vehicle and the damage involved.

How much does frame straightening cost?

The cost depends on how far the structure moved, where it was hit, and whether parts must be replaced instead of straightened. The materials matter too, since aluminum needs its own methods. We measure the vehicle and give you a clear estimate first.

Can a bent frame really be fixed?

In many cases, yes. With the right equipment and measurements, a frame or unibody can be pulled back to its factory dimensions. When a part is too damaged, it is replaced instead.

Do you straighten aluminum structures?

Yes. EZ Autobody is aluminum certified and an I-CAR Gold Class shop. Aluminum needs its own tools and methods, and we repair it the way the metal requires.

Which areas do you serve for frame repair?

Our shop is at 63 Jefferson Ave in Salem, 01970. We repair vehicles for drivers from Peabody, Beverly, Marblehead, Swampscott, Danvers, Lynn, Manchester-by-the-Sea and Saugus, and we offer towing assistance.

Is frame repair covered by your warranty?

Yes. We back all our work with a lifetime warranty. Parts carry limited warranties from their makers.

Will my car need a wheel alignment after frame work?

Often it does. Once the structure is straight, the wheels need to be set to their correct angles so the car drives straight and the tires wear evenly. We will tell you what your vehicle needs.

Frame Straightening & Structural Alignment Near Salem, MA

For frame straightening and structural alignment in Salem, MA, EZ Autobody brings your vehicle's structure back to factory specs. Call (978) 338-5797 or request an estimate online.

Our shop is at 63 Jefferson Ave in Salem. If your vehicle cannot be driven, ask about towing assistance.

63 Jefferson Ave

Salem, MA 01970

(978) 338-5797

Mon - Fri: 8:00am - 5:00pm

Sat: 9:00am - 1:00pm

Sun: By appointment

Get directions